Posts Tagged ‘Mad zeppelin’

Bob Clarke’s 1965 MAD Zeppelin: The Final Steps
Adding the Final Touches, and Hanging It Up (Figures 8-9)


FIGURE 8: THE SAILS
At this point, the only steps left are installing the Mainsail and Forward and After Sails. Oh, and the stringing of the two main parts. I chose to make black and white copies of the sails. Clarke’s original inserts are black and white and one-sided (probably to save money in printing and design costs).

Not sure why Clarke drew the FIGURE 8 illustration for the Small Sails. Their installation is straightforward. As for the Mainsail, the lack of structure for the mast caused the Yardarm and Mainsail to keep falling apart. This assembly needed patience and delicate finger work. As I tried to make this assembly, other parts of the MAD Zeppelin kept falling off.

TIP: Be resigned in the fact that you’ll have to adjust parts after stringing the parts up (see below).

(more…)

Bob Clarke’s 1965 MAD Zeppelin: The Assembly Continues
Putting the Ship Together (Figures 4-7)

 

FIGURE 4: ATTACH DECK UNIT
Looking at the Deck and Hull Units, one can easily see that the outer edges of each part are mostly tabs and slots. Clarke chose not to include an illustrative figure to show these two parts connecting. We will never know why he thought the super-easy Figure 3 needed to be illustrated when I had major struggles putting the Deck Unit into and on the assembled Hull.

I think one difficulty for me was the fact that I made the color copies of the MAD Zeppelin with basic 20lb copy paper. TIP: At this point, I realized that I should have used a heavier stock of paper that was similar in weight to the paper stock of the original insert.

My copy Zeppelin felt very fragile at this stage of assembly, and it got more delicate and precarious for the final bits of assembly. TIP: I had to make the cuts on the tabs (Tabs P and Q) of the Hull and Deck deeper in order to make these pieces insert in a way that didn’t keep the deck from popping up and out. TIP: As you can see from my photos, I put small pieces of tape over the middle connections of these two parts. They kept popping out as I tried to work the end tabs. Not pretty, but it keeps things together.

(more…)

Bob Clarke’s MAD Zeppelin: The Assembly Begins
Putting the Balloon and Hull Units Together (Figures 1-3)


INTRO
When the 1965 Worst From MAD No. 8 copy arrived in the mail, I went over to the copier machine at work to make copies of Bob Clarke’s MAD Zeppelin insert. I didn’t put much thought into how to make copies. Fortunately, Clarke made all the parts one-sided with perforations that could be folded over to make a second side. I quickly realized that I would have to push the spine of the MAD down a bit to get the parts closest to the gutter to lie flat for the copy.

Yikes! This pushing caused some of the die-cut parts to partially come unattached. There goes a possible grade-reducing defect. Even with moderate pushing, the color copies had a perspective “smear” near the gutter at the magazine’s spine. This can easily be seen in the photo showing most of the Zeppelin’s Balloon Unit (Clarke chose to capitalize the word Zeppelin and its smaller parts throughout his instructions). Look at both parts labelled Tab A and you can see the difference.

I wondered if this would cause the MAD Zeppelin assembly to be a bit off. Since the Balloon was Figure 1 of Clarke’s instructions, I hoped it wouldn’t come out too bad. As we shall see, another part caused the biggest headache, and it wasn’t smeared in the gutter.

(more…)

Prelude to a MAD Zeppelin
I assembled Bob Clarke’s 1965 MAD Zeppelin (so you don’t have to).

Here are the complete assembly instructions: Part 1, Part 2, Part 3.

Thus brewed a perfect storm for a geek collector. First, I went online to see if anyone had posted scans of the parts. I also searched for modern photographs of Clarke’s Zeppelin totally strung and assembled. I couldn’t find anything online, but did discover a world of paper object and model making. Cool, but, wow, the Internet had zero MAD Zeppelin images or how-tos. Guess that means I’m buying an expensive intact copy of the ’65 Worst From special and making color copies.

(more…)